Mac Prochamber, UD Pulleys, Autometer Gauge Pod, Phantom Gauges & Indiglo Speedo FS!
07-20-2006, 08:31 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Jan 2002
Location: Pensacola Florida
Posts: 577
Mac Prochamber, UD Pulleys, Autometer Gauge Pod, Phantom Gauges & Indiglo Speedo FS!
Set of White Faced Gauges out of a 97 Mustang GT, they should fit 96-98 Mustang GT's with 150 Speedometer. These are overlays and are VERY easy to install. They have a soft touch button to change the color up to 7 different shades. Includes all plug ins and inverter. Gives the gauges an 03-04 Cobra look at night! SOLD!
Autometer Triple Pillar Pod for 94-02 Hardtop Mustang, includes an actual pillar from a 97 GT so you can just unclip yours and snap the whole thing on without having to cut holes in your stock pillar! It has been painted 97 moonlight blue though, you could easily sand it down and repaint it. The finish isnt perfect up close but it's not bad, if you have other painted interior pieces, you paint it to match them. They are $60 plus shipping new! SOLD!
Autometer Phantom 2 1/16 Vacuum Gauge, includes vacuum line and fitting, no longer for sale at this time.
Autometer Phantom 2 1/16 Voltmeter, SOLD!
Autometer Phantom 2 1/16 Oil Pressure Gauge, Electric, missing the sender, you can get a new one from Autometer for $29.99 or possibly less, SOLD!
I can combine several items if you want, PM me an offer if you want everything or just a few things
I am PayPal Verified and Confirmed. I have over 260 positive feedbacks on Ebay and have sold hundreds of parts on CamaroZ28.com, sold parts on LS1tech.com, TurboDodge.com, Stangnet and Corral.
Autometer Triple Pillar Pod for 94-02 Hardtop Mustang, includes an actual pillar from a 97 GT so you can just unclip yours and snap the whole thing on without having to cut holes in your stock pillar! It has been painted 97 moonlight blue though, you could easily sand it down and repaint it. The finish isnt perfect up close but it's not bad, if you have other painted interior pieces, you paint it to match them. They are $60 plus shipping new! SOLD!
Autometer Phantom 2 1/16 Vacuum Gauge, includes vacuum line and fitting, no longer for sale at this time.
Autometer Phantom 2 1/16 Voltmeter, SOLD!
Autometer Phantom 2 1/16 Oil Pressure Gauge, Electric, missing the sender, you can get a new one from Autometer for $29.99 or possibly less, SOLD!
I can combine several items if you want, PM me an offer if you want everything or just a few things
I am PayPal Verified and Confirmed. I have over 260 positive feedbacks on Ebay and have sold hundreds of parts on CamaroZ28.com, sold parts on LS1tech.com, TurboDodge.com, Stangnet and Corral.
Last edited by Speeds8erM-1; 08-04-2006 at 03:42 PM.
07-20-2006, 08:31 PM
#2
TECH Enthusiast
Thread Starter
Join Date: Jan 2002
Location: Pensacola Florida
Posts: 577
Mac Underdrive Pulleys off of a 97 Mustang GT. The part number says they fit 96-98 Mustang GT 4.6 but most ud pulleys fit 96-mid 01, not sure what makes these different. This is the crank and water pump pulley, no alternator pulley (waste of time anyway, wont add anymore power and will dim your headlights). These are NOT piggyback style. They are in good shape and from Florida so they arent rusted out big time. There is minor surface rust where the water pump pulley rests but nothing you can see. SOLD!
Mac Prochamber 2.5 Inch for 99-04 GT or Cobra with stock or shorty headers for sale! This is the newer 3 piece design, all studs are intact, has the black HTC coating. It's off of a Florida car so no rust other than minor surface stuff here and there. No dents but does have a scrape on the bottom, doesnt affect performance and is only cosmetic. SOLD!
Mac Prochamber 2.5 Inch for 99-04 GT or Cobra with stock or shorty headers for sale! This is the newer 3 piece design, all studs are intact, has the black HTC coating. It's off of a Florida car so no rust other than minor surface stuff here and there. No dents but does have a scrape on the bottom, doesnt affect performance and is only cosmetic. SOLD!
Last edited by Speeds8erM-1; 07-29-2006 at 11:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
