WTT:99GT for 87-93lx
03-06-2008, 10:02 PM
#1
Teching In
Thread Starter
Join Date: Nov 2007
Posts: 9
WTT:99GT for 87-93lx
Looking to trade my 99 GT for an 87-93 lx, hatchs or notches.
No T-tops, MUST have a 5spd/6spd and no red interior, pretty much open to everything else.
On my GT I have pretty much all the bolt ons.
01 Gt shortblock, spun a rod bearing on the old motor, new shortblock has 35k on it and the body has 69K miles.laser red JLT CAI Granatelli UDP 180 degree thermostat ,PP 75mm mac o/r h pipe, cam longtube headers maganaflow cat-back Full-length subframe connectors SCT XCAl 2, custom tuned by woodbine motorsports, Edelbrock Upper Control Arms Spec Stage 3 clutch , Spec aluminum flywheel, Steeda clutch cable kit Tail-light tint 01 smoked headlights 6000k HID kit Mach 1 grille delete kit Mach 1 chin spoiler 01 cobra hood Autometer oil press. and air/fuel gauges. raptor shift light, Saleen Pedals PRO 5.0 shifter Rear seat delete kit Apex lowering springs 1.7/1.5 NGK TR6 plugs gapped at .035 3.73s mmr lcas,accel cops, 18X10 deep dish bullitts w/ 295 /35/18 BFgoodrich KDW2s, 18X9 bullitts up front with 245/40/18 nexen n3000s ( have fresh 275 sport contact 2s that will go with the car), windows tinted @ 20% and i'm sure i'm missing a couple other things, every single gasket in the engine is new, along with new fuel filter, fuel tank to filler neck gasket, royal purple in the rear, and mobil one in the trans and engine. Email me at drcptnmorango2@yahoo.com if interested
No T-tops, MUST have a 5spd/6spd and no red interior, pretty much open to everything else.
On my GT I have pretty much all the bolt ons.
01 Gt shortblock, spun a rod bearing on the old motor, new shortblock has 35k on it and the body has 69K miles.laser red JLT CAI Granatelli UDP 180 degree thermostat ,PP 75mm mac o/r h pipe, cam longtube headers maganaflow cat-back Full-length subframe connectors SCT XCAl 2, custom tuned by woodbine motorsports, Edelbrock Upper Control Arms Spec Stage 3 clutch , Spec aluminum flywheel, Steeda clutch cable kit Tail-light tint 01 smoked headlights 6000k HID kit Mach 1 grille delete kit Mach 1 chin spoiler 01 cobra hood Autometer oil press. and air/fuel gauges. raptor shift light, Saleen Pedals PRO 5.0 shifter Rear seat delete kit Apex lowering springs 1.7/1.5 NGK TR6 plugs gapped at .035 3.73s mmr lcas,accel cops, 18X10 deep dish bullitts w/ 295 /35/18 BFgoodrich KDW2s, 18X9 bullitts up front with 245/40/18 nexen n3000s ( have fresh 275 sport contact 2s that will go with the car), windows tinted @ 20% and i'm sure i'm missing a couple other things, every single gasket in the engine is new, along with new fuel filter, fuel tank to filler neck gasket, royal purple in the rear, and mobil one in the trans and engine. Email me at drcptnmorango2@yahoo.com if interested
Thread
Thread Starter
Forum
Replies
Last Post
