Let the modding begin (pic)
#1
Corvette & Mustang Moderator
Thread Starter
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,310
Let the modding begin (pic)
Or should I say continue. I do have an SCT tune already.
I'm going to remove my front sway bar and install this Granatelli radiator support tomorrow. That should take off a little weight up front.
This support weighs 3 3/4 pounds. BMR advertises 5 1/2 for theirs. Not much difference in weight but if it works why not. It only costs $65 too compared to $149 for the BMR.
I'm going to remove my front sway bar and install this Granatelli radiator support tomorrow. That should take off a little weight up front.
This support weighs 3 3/4 pounds. BMR advertises 5 1/2 for theirs. Not much difference in weight but if it works why not. It only costs $65 too compared to $149 for the BMR.
#3
Corvette & Mustang Moderator
Thread Starter
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,310
Originally Posted by Brains
Willing to sell that front bar yet?
I can't imagine you can't find some one willing to part with theirs. Did you try over on http://www.mustangforums.com/forumid_5/tt.htm ?
#5
Corvette & Mustang Moderator
Thread Starter
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,310
Originally Posted by Brains
Haven't tried there.. Never been on that site.
I might just modify an F-body bar to fit. Cut off the ends and weld on 1/4" thick steel plate for "arms" to reach back to the endlinks.
I might just modify an F-body bar to fit. Cut off the ends and weld on 1/4" thick steel plate for "arms" to reach back to the endlinks.
#8
Corvette & Mustang Moderator
Thread Starter
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,310
Originally Posted by Brains
Just a "little" more money than I'm willing to spend for basically throw-away parts (IMHO). I'll make what I have work
How much would you be willing to pay for mine? I assume you want just the front? I would sure hate to keep it forever for nothing if somebody needs it.
#10
Corvette & Mustang Moderator
Thread Starter
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,310
Originally Posted by Brains
I'd pay $50 landed, and yes - I only need the front. The rear setup is a solid Wolfe bar.