BOOSTED98GT
04-21-2006, 02:09 PM
I would really like to install a sprayer on the front of my IC to keep IAT's down to a minimum, especially when hotlapping at the strip. I have considered spraying a small shot into the airstream, but that would require a new tune, and possibly pushing my stock internals past their limits.
I have considered a water sprayer, but prefer N2O to reduce temps to sub-ambient. CO2 sprayers have been considered also.
But, since there seems to be a lot of info showing that anything that is sprayed on the IC has a good chance of making it to the air filter (esp. on my car where the filter is only a foot away from the IC) and being ingested into the engine, I'm leaning towards N2O. The reason being I would prefer to have a few extra molecules of oxygen making it to the engine versus Carbon Dioxide. Yes, I understand that this may lean me out, but I have a wideband that is utilized at the strip to keep an eye on this. Also, my A/F is currently at 11.3-11.4 the whole way across the board so I do have a little to play with. It's not like ALOT would be getting to the filter, and it wouldn't be a big deal if I was spraying it while in the staging lanes with no load on the engine before a run. (Or maybe even with the engine off.)
EDIT: These links are not working right from this site, even though I copied this post from one I made on ModularFords (http://www.modularfords.com/forums/power-adder/n20-intercooler-sprayers-anyone-run-them-49877.html#post516053) and they work fine over there???
N20 Setups:
http://www.nitrousexpress.com/Catalo...ntercooler.pdf
CO2 Setups:
http://cgi.ebay.com/ebaymotors/ws/eB..._BIN_Stores_IT
http://store.summitracing.com/partde...5&autoview=sku
http://www.designengineering.com/pro...sp&pid=5&tid=1
If you have any ideas or recommendations on a setup, please let me know. Also, if you know of a good place to purchase one of these setups, please post that also.
I have considered a water sprayer, but prefer N2O to reduce temps to sub-ambient. CO2 sprayers have been considered also.
But, since there seems to be a lot of info showing that anything that is sprayed on the IC has a good chance of making it to the air filter (esp. on my car where the filter is only a foot away from the IC) and being ingested into the engine, I'm leaning towards N2O. The reason being I would prefer to have a few extra molecules of oxygen making it to the engine versus Carbon Dioxide. Yes, I understand that this may lean me out, but I have a wideband that is utilized at the strip to keep an eye on this. Also, my A/F is currently at 11.3-11.4 the whole way across the board so I do have a little to play with. It's not like ALOT would be getting to the filter, and it wouldn't be a big deal if I was spraying it while in the staging lanes with no load on the engine before a run. (Or maybe even with the engine off.)
EDIT: These links are not working right from this site, even though I copied this post from one I made on ModularFords (http://www.modularfords.com/forums/power-adder/n20-intercooler-sprayers-anyone-run-them-49877.html#post516053) and they work fine over there???
N20 Setups:
http://www.nitrousexpress.com/Catalo...ntercooler.pdf
CO2 Setups:
http://cgi.ebay.com/ebaymotors/ws/eB..._BIN_Stores_IT
http://store.summitracing.com/partde...5&autoview=sku
http://www.designengineering.com/pro...sp&pid=5&tid=1
If you have any ideas or recommendations on a setup, please let me know. Also, if you know of a good place to purchase one of these setups, please post that also.